8 REM enable the feature connector (maintained by Windows 95)\n
9 vlenable.sys
10 REM vlenable is non resident\n\n
130 For typical office applications, you should probably use 256 color mode, in order to maximize display size.\n\nRemember, the more colors you choose, the smaller your maximum display size will be.
131 Multimedia applications may require Video for Windows playback, or the use of add-on hardware either via Scenic Highway or via the VGA feature connector. For all these applications you are advised to use 256 color mode.
132 \n\nFor typical multimedia applications, you should probably use 'high color' mode, although some applications may require the use of only 256 colors.
133 \n\n\nFor graphic design work, you will probably want to use 'true color' mode.
134 The more colors you choose, the smaller your maximum display size will be.\n\nA good all-round compromise is to use 'high color' mode.
135 You will probably want to choose the largest size that your monitor can display.
136 You will probably want to choose the largest size that your monitor can display.
137 The maximum display size you can choose is limited because you need to use 'true color' mode.
138 You will probably want to choose the largest size that your monitor can display.
139 The maximum display size you can choose is limited because you are in a multimedia mode.
140 \n\n\nFor graphic design work, you will probably want to use 'high color' mode.
146 %d by %d
12000 &Tools|Smart&Display|Display Settings\nLaunches the Display Control Panel and displays the SmartDisplay page\nSmartDisplay
12001 &Tools|Smart&Display|Display Centering\nAllows you to center the display within your screen\nCentering
20010 Error while updating initialisation files
20011 Display centering cannot work with this display driver. Re-install the appropriate drivers for your graphics card using Windows Setup.
20012 Insufficient memory available.
20013 Do you want to abandon the display alignments you have set and revert to the preset alignments for all display modes?
20032 The Display Driver is running in fail safe mode. This is triggered by pressing the Ctrl key during Windows restart. Please restart Windows normally before using this application.
20033 Your current display settings do not match the selected display mode.\nDo you want to change settings to this mode now?\nIf you choose No, remember that the settings shown have not yet been applied.
20034 Your current display settings do not match the selected display mode.\nDo you want to change settings to this mode now?
20035 The settings for this display mode exceed the capabilities of your hardware.\nThe closest available settings are:\n%s display size, %s Hz refresh rate.\nDo you want to change the stored settings to match your hardware capabilities?
20036 Can't create any more new display modes.\n Please remove one or more saved modes and try again.
20100 SmartDisplay will now resize your desktop.\nThis may take a few seconds, during which your screen might flicker.\nIf Windows does not reappear correctly, wait 10 seconds, and your original settings will be restored.
20101 You resized your desktop. Do you want to keep this new size?
20102 SmartDisplay has restored your original settings.
20103 You must restart your computer before the new settings take effect.\nDo you want to restart your computer now?
20104 Your desktop settings are no longer valid for this display size.\nThe desktop will be set to the size of your display.\nTo reconfigure your desktop, click the desktop tab.
20105 You changed your display settings. Do you want to keep the new settings?
20106 SmartDisplay will now change your display settings.\nThis may take a few seconds, during which your screen might flicker.\nIf Windows does not reappear correctly, wait 10 seconds, and your original settings will be restored.
20107 To apply these changes, SmartDisplay must change your display settings.\nAfterwards, you can use the Display tab to view the changes.\nIf Windows does not reappear correctly, wait 10 seconds, and your original settings will be restored.
20110 Advanced Settings
20111 You must give this new display mode a name.
20112 This name is already being used by an existing display mode.\nPlease use a different name for this new mode.
20200 SmartDisplay
20201 SmartDisplay Advanced Settings
20202 Center Display
20203 Desktop
20204 Connectivity
20205 Display
20206 Properties
20207 Screen
20210 SmartDisplay Wizard - Options
20211 SmartDisplay Wizard - Colors
20212 SmartDisplay Wizard - Connectivity
20213 SmartDisplay Wizard - Display Size
20214 SmartDisplay Wizard - Desktop Size
20215 SmartDisplay Wizard - Refresh Rate
20216 SmartDisplay Wizard - Center Display
20217 SmartDisplay Wizard
20218 You have changed the number of colors for your display.\nWindows must restart for these changes to take place.\nDo you want to restart Windows?
20219 : %s colors %d,%d [%d,%d] %s Hz %s
20220 %s colors, %d x %d display, %d x %d desktop, %s Hz %s
20221 65K
20222 16m
20223 16
20224 256
20225 : %s colors %d x %d %s Hz %s
20226 SmartDisplay Settings Wizard
20227 %s colors %d x %d %s Hz
20228 SmartDisplay cannot be used in a display mode with less than 256 colors.
20229 Do you want to Apply the changes you have just made, before leaving this page?\nIf you choose No, the changes will be discarded.
20230 &Apply
20231 OK
20232 Are you sure you want to remove this preset mode?
20233 The current Windows font is too large for the selected display size.\nWindows must restart to change the font.\nDo you want to restart Windows?
20234 You have changed your display settings.\nSmartDisplay will now test the new display size.\nPress OK to continue.
20235 You have changed your desktop settings.\nSmartDisplay will now test the new desktop size. \nPress OK to continue.
